What is Multi-purpose Lathe ?

  Lathe Mill Combo/Bench Lathe/Mini Lathe/Multi-purpose lathe manufacture,supplier- Hefei Craft Machinery

This article is from http://www.hfcraftmachinery.com/multi-purpose-lathe.html

   Multi-purpose Lathe, also called Lathe Mill Combo is a auto-feeding, turning function as the main body with drilling, milling processing machine tools. It can be used for turning and boring shaft parts,sleeve parts on different metals, plastics and other materials Multi-purpose Lathe also can be used metric and inch thread turning, drilling, Milling  and other processing.One Machine can meet your total work piece processing.

●Lubrication

Multi-purpose Lathe LMC-750 Lubrication figure

Multi-purpose Lathe LMC-750 Lubrication figure

● Operating Parts

Multi-purpose Lathe LMC-750 Operating Parts figure

1 Eccentric wheel handle, to loosen or tension v-belt quickly when adjusting v-belts. 2 and 5 Cone knob, to fasten the drill-mill head guard. 

3 Height adjusting shaft, matched with rocker bar to adjust the height of drill-mill head. 

4 Magnetic switches, to control drill-mill motor and spindle to start, stop or change  direction. 

6 Hand-wheel, to micro-feed drill-mill spindle. 

7 Handle, to fasten drill-mill spindle quill.  

8 Handle, to feed drill-mill spindle when drilling. 

9 Knob, to lock drill-mill head when milling. 

10 knobs, to open or close drive box cover. 

11 Magnetic switches, to control the lathe motor and spindle to start, stop or change direction. 

12 Handle, to fasten the drill/mill head. 

13 Cone knob, to control the clutch to changeover the

function of hand wheel 6 and handle 8 (pull it out, drill/mill spindle feed quickly by operating

handle 8. While pushes it in, the drill-mill spindle micro-feed by using hand-wheel 6). 14 Gearshift handle, among its 3 positions the middle one is neutral position. The handle can be used to cut threads and perform power feed within a certain amount if matched with change gears. 

15 Handle for forward/backward feed. It also has three positions and the middle is neutral position.By using it, you can make the table automatic feed forward or backward in longitudinal direction.

Power feed can be stopped (except the high speed feed) by shifting this handle to the middle position (neutral). 

16 Handle, to control the longitudinal/cross feed to be engaged or disengaged.

17 Hand wheel, to move the table longitudinally by hand. 

18 Hand wheel, to move the table

longitudinally by hand. 

19 Handle, to fix the tool post that can be rotated when the handle is loosened. 

20 Handle, to feed the tool post carriage, generally to cut cone surface. 

21 Handle, to lock tail stock sleeve. 

22 Handle, to control the split nut to be engaged or disengaged when cutting threads. 

23 Chasing dial (Dial thread indicator), correction device for cutting threads.

24 Handle, to lock tailstock.

25 Hand wheel, to feed tail stock sleeve. 

26 Power source indicator. 

27 Master stop (rapid stop) switch, to stop the machine wholly.